Add: C3 Building, Yabian Industrial Park, Shajing Street, Baoan District, Shenzhen, China
Tel: 86-136-99856040
Tel: 86-180-26686040
Fax: 86-755-26231618
Web: www.newlytrend.com
Email: info@newlytrend.com
Diameter 8mm to 250mm, length 1000mm or custom made
Nylon rods, Nylon Bars has good toughness and wear resistance force, oil resistant, seismic, tensile, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts., this product is widely used in plastic instead of steel, iron, copper and other metal material, is an important engineering plastics;Cast Nylon rods, Nylon bars instead of mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance.Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment.Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, Jane, bushing connector, etc
The main features
Nylon Rod, Nylon Bar Mechanical strength, stiffness, hardness, high toughness, good ageing resistance, good mechanical damping capacity, good sliding resistance, excellent wear resistance, good machining performance, when used for precision control, no creep phenomenon, anti-wear performance good, good dimensional stability.
Application field
Nylon rod, Nylon Bar Widely used in chemical machinery, anti-corrosion equipment gear making bad material and parts.Wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment, etc.
Use
Nylon rod, Nylon bar with good toughness, abrasion resistance, oil resistance, strong earthquake, good tensile, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts.Products, widely used in plastic instead of steel, iron, copper and other metal material, is an important engineering plastics;Cast nylon instead of mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance.Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, set of Jane, axle housing connector, etc.
Typical Properties | Test Standard | Unit | Typical Value | Typical Value | Typical Value | |
(Conductive PA6) | (Antistatic PA6) | (Insulation PA6) | ||||
I. Physical Properties | ||||||
Density | ISO 1183 | g/cm3 | 1.1-1.13 | 1.13-1.15 | 1.13-1.15 | |
Water absorption | ISO 62 | % | 3-5 | 3-5 | 3-5 | |
II.Mechanical Properties | ||||||
Tensile strength at yield | ISO 527-2 | MPa | 73 | 80 | 80 | |
Tensile strength at break | ISO 527-2 | MPa | / | / | / | |
Elongation at break | ISO 527-2 | % | >41 | >50 | >50 | |
Modulus of elasticity after tensile test | ISO 527-2 | MPa | / | / | / | |
Modulus of elasticity after flexural test | ISO 178 | MPa | 2650 | 3000 | 3000 | |
Hardness-Rockwell | ISO 2039-2 | 160 | 160 | 160 | ||
Hardness-Shore D | DIN 53505 | 85 | 88 | 85 | ||
Charpy impact strength at 23°C | ISO 179 | kJ/m2 | 4.6 | 5.5 | 5.5 | |
Friction coefficient | DIN 53375 | 0.32-0.39 | 0.38-0.45 | 0.38-0.45 | ||
III.Thermal Properties | ||||||
Heat deflection temperature-HDT/A | ISO 75-2 | °C | 55-75 | 55-75 | 55-75 | |
Max.service temperature-Short term | °C | ≤180 | ≤180 | ≤180 | ||
Max.Service Temperature-Long term | °C | / | / | / | ||
Thermal conductivity at 23°C | DIN 11359 | W/(K*m) | 0.28 | 0.28 | 0.28 | |
Coefficient of linear thermal expansion | ISO 11359 | 10-4*K-1 | 0.7-1.0 | 0.7-1.0 | 0.7-1.0 | |
IV.Electrical Properties | ||||||
Dielectric constant at 1MHz | IEC 60250 | 106HZ | 3.5 | 3.5 | 3.5 | |
Dielectric loss factor at 1 MHz | IEC 60250 | 106HZ | 0.023 | 0.023 | 0.023 | |
Surface resistivity | IEC 60093 | Ohm(Ω ) | ≥104 | ≥108 | ≥1012 | |
Dielectric strength | IEC 60243-1 | kV/mm | >52 | >56 | 60 | |
V.Miscellaneous Data | ||||||
Flammability | UL 94 | HB | HB | HB |
【 Keyword Link】:
Nylon Sheet, Nylon Plate, MC Nylon Sheet, Nylon Sheets, Nylon Plates, MC Nylon Sheets, Nylon Rod, Nylon Bar, Nylon Rods,Nylon Bars